Skip to content
    Changelog

    What's new and improved in Monokaido

    Every entry comes here straight from the production release — with its date, module and type of change.

    Filters· 632 entries
    Module
    FixVendors11 October 2026

    Fixes: setting a parameter in bulk, flows after imports, incomplete imports, shop links

    Fixes to bulk edits, imports and the shop. (1) Setting a parameter in bulk — “Set Parameter” now changes the selected products' values; before, the change never showed. A set value replaces the parameter's current values and survives feed syncs. Saved rules with this action had their schedule switched off; switch it back on after checking the rule. (2) Flows for imported products — “On Product Create” flows now also run for products a feed import creates, within the flow's vendor and filter. (3) Incomplete imports no longer hide products — “Auto-hide missing products” hides products only after an import that read the whole feed, and an interrupted import switches off no variants. A feed with no products counts as a failed import. (4) Heureka without duplicates — When a supplier gives an existing item a new ID, the Heureka feed import recognises the product by its URL or EAN and updates it instead of creating a duplicate. (5) Product links in the shop — Product cards without their own URL, and cross-sell and upsell cards, open the product, not an error page. (6) Fresh catalogue after imports — New brands, filters and listings show in the shop within minutes of an import; before, it could show the old state for up to 6 hours. (7) Vendor links — A vendor link on the dashboard, in the “Origin” column or on “Raw Data” opens its row in the vendor list, not an error page. (8) Parameters with several values — Grandus imports keep every value of a parameter repeated in the feed; the shop's product detail lists it once, values separated by commas.

    ImprovementProducts11 October 2026

    Improvements: Grandus duplicates, parameter translations, export feeds and Trek imports

    More reliable exports, faster loading and less manual work with duplicates. (1) Grandus category for duplicates — When you link a Grandus product with another supplier’s product in Products → Duplicates, the other product takes the Grandus product’s manual category (only one from your manual categories) in place of its own; in a merge, the product that remains gets it. This happens once: later changes do not follow, the category stays if you unlink, and “Undo merge” restores the previous one unless you have changed it since. (2) Parameter translations for large catalogues — Parameters → Translations now loads for large catalogues, where it used to time out. If it still takes too long, it shows an error instead of retrying in the background. (3) More reliable export feeds — Google Merchant, Facebook, Árukereső and Árgép feeds are built in parts, so they generate even for very large catalogues. The published file is only replaced by a finished one: a half-written feed is never downloaded, and a failed run keeps the previous one. Exports come with packages M and higher. (4) Faster Trek imports — Trek syncs skip feed rows that have not changed. Every product is still fully processed at least once a day and after any change to mappings, rules, margins, regions or exchange rates; only products that really changed count as updated. (5) Prompt types in your language — In Settings → AI Settings on the “Prompts” tab, prompt types have translated names and descriptions, and the list offers every type, including “Blog Articles”, shown only with the E-shop add-on.

    New featureAI10 October 2026

    Translation glossary: terms the AI does not translate

    Settings → Languages has a new Translation glossary card. List the phrases the AI must not translate (e.g. “SK” on a keyboard, so “SK klávesnica” never becomes “HU billentyűzet”), or must translate exactly the way you say — e.g. “SK distribúcia” always as “EU disztribúció” in Hungarian. Add a note or a condition for when a term applies. The glossary applies to every AI translation of products, parameters and their values, categories, the blog and storefront content; re-translate texts that are already translated to apply it there.

    ImprovementParameters9 October 2026

    Improvements: a welcome after sign-up, a faster dashboard and parameter mappings

    Improvements to parameters, the dashboard and the shop. (1) Welcome after sign-up — The guide opens on “Congratulations, you're signed up!”: start the virtual assistant (it fills in parameters on three sample products and writes a description) or go straight to “Set up products”. Restart it in Settings on the Profile tab. (2) Company IDs at checkout — On a company purchase, the shop checks the format of the IČO and DIČ for the billing country, and Slovak and Czech IČOs against their check digit. The IČ DPH is checked when the shop has EU VAT exemption on. (3) Storefront v2 for search engines — The header links to the first two category levels; a missing product, category or article shows an error page in the shop's design, kept out of search indexes. (4) Faster dashboard — The dashboard, Brands and Parameter Templates load much faster on large catalogues. (5) Switch off or delete a mapping — In Parameters → Parameter Mappings, editors and admins can switch a mapping off and admins can delete it; stored product values do not change right away. (6) AI value mapping — Switch off suggested new target values or add your own; “Map again” processes the values still unmapped. (7) Vendors in mappings — A source parameter shows its feed's vendor and the target the vendors whose products hold it; the parameter picker also searches by code or vendor. (8) Customer company data — A registered customer's detail in E-commerce → Customers shows a “Company Data” card (IČO, DIČ, IČ DPH) when their latest order since this change was placed for a company.

    New featureAuthentication9 October 2026

    Sign-up without a password — your account is ready at once with an e-mail and phone

    Signing up is now shorter: an e-mail and a phone number are enough, the discount code is optional, and company details for invoicing are asked for only when you tick “Do you need company details for invoicing?”. Click “Create Account” and the account is created and you are signed in straight away — no name or password needed. You set a password for signing in on a computer through a link, valid for 3 days, in the welcome e-mail “Welcome to Monokaido — set your password”. If the e-mail address probably has a typo, the form asks “Is there a typo in the address?” before the account is created and offers the fix; once you type the eighth digit of the company ID (IČO), the register details fill in by themselves without overwriting what you typed. Where the app asks for your password to confirm a sensitive change, an account without one is offered “Send a link to set a password”.

    FixStorefront8 October 2026

    Fixes: parameter values, category mapping, export feeds, shop sitemap and permissions

    Fixes for large catalogues, export feeds and the shop. (1) Parameter values on large catalogues — Value suggestions under “Parameter Filters” in the advanced product filters and in “Generate Subcategories by Parameter” (Categories → Manual Categories) now load quickly; before, they often did not load at all. (2) Mapping with a parameter condition — Applying a category mapping rule with no source category and only parameter conditions no longer fails on a large catalogue. (3) Feed and shop — Choosing “None (all products)” in an export feed's “Storefront” field now removes the link when you save; before, the old storefront stayed. Without the E-shop add-on the form offers neither a storefront picker nor the Sitemap type, and a leftover link of a non-sitemap feed is removed with “Remove link”. (4) Shop sitemap — When a shop's sitemap feed is changed to another type, switched off, linked to another shop or deleted, the shop moves to its newest other active sitemap feed, if it has one; before, that feed was ignored. Shops that were not using their active sitemap feed were repaired. (5) Home-screen shortcut — In shops not running on Storefront v2 that have a favicon, a shortcut added to a phone's home screen shows the shop's icon and your company name and opens on the home page. (6) Parameter permissions — Admins and editors create and change parameters; only admins can delete them. The Viewer role sees E-commerce → Storefront Parameters read-only, and “Refresh dictionary of existing values” and “Remove from Monokaido” are not shown to it.

    FixERP and transfers7 October 2026

    Fixes: Cybersoft i6 customers, colour translations, refunds, sitemap and image previews

    Fixes to transfers, translations, the shop and the admin. (1) Customers in Cybersoft i6 — An order sent to Cybersoft i6 for a customer i6 already knows now updates their card there: company ID, tax ID and VAT ID always; name, address, e-mail and phone only when the order has them. So a company order after a private one (or the reverse) is booked with the right VAT. A Hungarian tax number (adószám) without 11 digits no longer makes i6 reject the order: it is left out and the order’s VAT ID still goes to i6. (2) Colour translations — Values of colour parameters (type “Color”, e.g. “White”) are translated like text values: in the shop and its filters, export feeds, Parameters → Translations and by the AI. Translations stored before the type was switched from text show again. (3) Refunds — A Stripe card payment that failed and then went through on a retry is now recorded as successful, so “Issue Refund” in the order detail (E-commerce → Orders) returns the money; before, the refund found no payment. (4) Sitemap and brands in the shop — The sitemap export feed no longer lists vendor categories, external URLs or redirecting category shortcuts. The shop’s brand list shows only active brands with products in the shop. (5) Image previews — A logo picked in the “Upload Brand Logo” dialogue and photos added to the “New product” gallery show before saving; the browser used to block them. (6) Several Crussis vendors — Each Crussis vendor takes its stock from its own availability feed; before, only one of them got stock and the other’s variants had no real stock.

    New featureE-commerce7 October 2026

    Edit orders — correct the customer, addresses, shipping and payment

    Correct the details of an order you have received with the new “Edit details” button on its detail page (E-commerce → Orders). It covers the customer’s name, email and phone, the company details (company name, company ID, tax number, EU VAT number) and both the shipping and billing addresses. In “Shipping and payment” you change the shipping and payment method and their prices — the list price is filled in and you see the new order total; for Packeta delivery you pick the pickup point on the map right in the dialogue. Item prices and VAT are not recalculated, and if you change the payment method or the total, a payment still open at the payment gateway is cancelled — the dialogue warns you first. Admins and editors with the E-shop add-on can make edits. If the order is already in the ERP, the changes are not sent there automatically; on a split order the details are saved to the whole order and every sub-order, but shipping and payment cannot be changed there.

    New featureAuthentication4 October 2026

    Phone number at sign-up and in your profile — with or without a country code

    A phone number is now required when you register a new account — it is used to get the account started and to sort out billing. Write it the way you usually do: with a country code (+421 901 234 567 or 00421…) or without one (0901 234 567); spaces, dashes, brackets and dots are fine. The number must have 8 to 15 digits, and a country code is never added for you. Every user finds the Phone number field in Settings → Profile, and the profile saves only with a valid number, so an account that has none yet fills it in at its next save. A stored number can be changed but not removed.

    New featureProducts2 October 2026

    Instagram and Facebook posts straight from the product detail

    On the product detail page, a new ⋯ menu next to the Edit button holds Instagram post and Facebook post. Monokaido turns the product photo into a branded image with the product name, the brand and your shop logo (4 : 5 for Instagram, 1.91 : 1 for Facebook), and the AI writes the post text in your brand voice — hashtags included. Download the image and copy the text, or publish the post right away to your Facebook Page and the Instagram account linked to it. An administrator connects the Page in Settings → Social media by pasting a token from Meta Business Suite; until then, a Set up link stands in for the Publish button. That is also where you adjust the prompts the AI writes the post text from — the same prompts are in the prompt gallery in the AI settings.

    New featureE-commerce2 October 2026

    Newsletter — the subscribers from your shops in one place

    The newsletter sign-up form in the shop footer and the Newsletter section on the home page (Storefront v2) now store contacts in E-commerce → Newsletter. Customers who tick the marketing e-mails box in their account join the list too — and unsubscribe by themselves when they untick it. Every contact keeps proof of consent: when, in which shop and language they signed up and the consent wording they saw. Filter the list by shop or status and export it to a CSV with one click, ready for Mailchimp, Ecomail, MailerLite, Brevo and other mailing services. An unsubscribed contact stays on the list as a record; erasing it at the customer's request removes it completely.

    New featureStorefront2 October 2026

    Storefront design — one-click styles, corner radius and buttons

    The Design tab now opens with a Shop style gallery of five presets — Classic, Minimal, Elegant, Bold and Tech. Each draws a miniature of the shop with a heading, a button and a product card, so you see the result before you click. A preset sets colours, fonts, corners, buttons and product cards in one go, and leaves logos, texts and sections alone. You can also fine-tune every detail on its own: corner radius for inputs, cards, banners and the Sale and New badges in pixels, buttons (radius, font weight, capitals, shadow) and the product card (border, shadow, text alignment). Drag a slider and the preview changes on the spot. The editor now looks like the rest of the admin, and the whole walkthrough is in the Storefront design chapter of the manual — the question mark in the editor's top bar takes you there.

    New featureStorefront1 October 2026

    Storefront v2 — a shop whose look you put together yourself

    The new Storefront v2 comes with a visual editor under E-commerce → Storefront Builder. Build the home page from sections — banners, categories, product carousels, text, a newsletter sign-up or the blog — by dragging them into place, and give each its own size, spacing, colours and whether it shows on desktop, on mobile or everywhere. Next to the settings is a live preview of your real shop with your catalogue, and a click on a section right in the preview opens it. Set the shared look once in the company default design, and each storefront changes only what should differ. Changes go to a draft, customers see them only once you publish, and an older version is one click away. Not sure where to start? Describe the look you want to Monokaido AI and review its proposal before you apply it. Switch Storefront v2 on when you create a storefront or in its settings; shops on the classic storefront keep running unchanged.

    New featureVendors30 September 2026

    Vendor images on our server — they load even when the vendor’s server blocks access

    If a vendor’s server lets no one from outside reach its images (e.g. it allows only selected IP addresses), turn on “Download images to our server”. You will find it under Settings → Vendors & Imports when editing a vendor, and when adding one through “AutoAdd – AI feed analysis” or “Manual file upload”. We download the product images to our server and serve them from there in the admin, the e-shop, export feeds and ERP transfers; in the e-shop and ERP transfers this also covers images embedded in descriptions. Existing images are downloaded in the background after saving, and the form shows the progress (“Downloaded X of Y images”, waiting, failed and the last error). About once a week we check the copies against the vendor, so a changed image is refreshed. The switch is off by default, and editors and admins can change it.

    FixVendors30 September 2026

    Fixes: 23% VAT, feed imports, file uploads, WooCommerce, images and AI

    Fixes for imports, transfers, file uploads and AI. (1) 23% VAT — A company you add through “Create Company” gets a Slovak region at 23% VAT instead of 20%, and Slovak regions at exactly 20% were moved to 23%. Stored prices were not rewritten: items without their own VAT are corrected at the vendor’s next sync. (2) Parameters no longer stop imports — A sync no longer fails when a product already holds the same parameter value from AI, a person, a rule or a merge; an over-long value is shortened (a list after its last whole entry). (3) Large Heureka feeds — The feed is downloaded in full before it is processed, so a large catalogue is no longer cut off halfway. (4) File uploads — A rejected file gets a clear reason, and a file over 50 MB (200 MB for BMEcat) is refused before it uploads. “Upload new file” works for BMEcat (ETIM) vendors, and compressed BMEcat catalogues (.xml.gz, .zip) sync. (5) WooCommerce — Adding a WooCommerce vendor opens its form, a new transfer can be saved once the key and secret are filled in, and pushing back to the shop the products came from updates existing variations instead of adding new ones. (6) Images in the admin — Vendor images on plain http or a non-standard port and files stored on our server now display; small thumbnails load resized. (7) Newer AI models — Newer OpenAI models (GPT-5 included) and Claude models work with your own API key; before, they could block every AI feature. (8) Flows and filters — A flow started by a product event (e.g. “On Product Create”) runs only on products that match its filter.

    FixStorefront30 September 2026

    Fixes: images in the shop and export feeds, XML feeds, switched-off photos in AI, e-mails

    Fixes to images in your shop and exports, feed imports, AI and e-mails. (1) Own images in the shop — Product photos stored in Monokaido (uploaded by hand or made in Photo Studio) now show in your e-shop’s product cards, quick view, search, cart, checkout and the order in a customer’s account, and in order e-mails. Images for social networks and search engines carry a full address. (2) Images in export feeds — Google, Facebook, Árukereső and Árgép feeds now always give images stored in Monokaido a full public address that the portal can download. (3) Vendor XML and JSON feeds — For vendors added through “AutoAdd – AI feed analysis” or “Manual dynamic feed”, an HTML description wrapped in a CDATA block is no longer lost, accented letters written as numeric codes are stored as the real characters, and a JSON feed that starts with a byte-order mark (BOM) is read without an error. (4) AI uses only photos that are on — A photo you switched off in the product gallery (“Off”) no longer appears in a description the AI generates, and the AI no longer uses it to read parameters from photos, to write image alt texts or to translate them. (5) Deadline e-mails — The warning that the deadline to pay for a package, or a free period from a code, is ending mentions the e-shop going into maintenance mode only when the company runs an e-shop. A company that has since bought a package no longer gets a warning that its account will be locked after the free period.

    New featureSettings30 September 2026

    Change card in your subscription — future payments come from the new card

    You can now change the card your subscription is charged to right in the app. Under Settings → Subscription, click “Change card” and enter the new card on Stripe’s payment page — nothing is charged. When you come back, the app confirms that future payments will be taken from the new card; if you cancel, your previous card stays. The button appears only while your subscription runs through Stripe, and only company admins can use it — other members see it disabled.

    New featureImport/Export30 September 2026

    Manual file upload — XML and JSON now accepted alongside CSV and Excel

    The Manual file upload tile now takes XML and JSON files as well as CSV and Excel (.csv, .xlsx, .xlsm, .xlsb, .xls, .xml, .json, up to 50 MB). Find it under Settings → Vendors & Imports → Add Vendor; the format is detected automatically and you confirm or adjust the suggested mapping. Variants nested inside one product, such as in a Shoptet export, are split into rows of their own that inherit the product’s data, and for the parameter list the wizard offers only lists in which it found both a name and a value. An XML file in UTF-16, or in windows-1250 without the file saying so, is stored converted to UTF-8 so later syncs read it without errors. A new file for an existing vendor (Upload new file) must be in the same format as before; another format is refused with an explanation. Admins and editors can add such a vendor within your package’s vendor limit.

    New featureParameters30 September 2026

    Edit any parameter value by hand — your correction stays until you undo it

    On the product edit page you can now correct any stored parameter value, including one a feed, the AI or a rule wrote. On the product detail click Edit Product, then in the Product Parameters table choose “Edit value” from the ⋯ menu next to the value. The saved value becomes manual: syncs do not overwrite it, neither syncs nor rules add the replaced value back, and the AI overwrites it only when you explicitly turn on “Overwrite human-entered values”. The Origin column shows who entered the value and when, and “Restore the original value” removes your value, brings the original back, and later syncs update it from its source again. A value overwritten in Parameters → Fill Parameters or corrected in Products → Changes to review is protected the same way. Admins and editors can edit values.

    FixProducts30 September 2026

    Fixes: merged parameters, global parameter mappings, Grandus, package limits and Stripe

    Fixes for parameters, transfers, the product list and payments. (1) Parameters after a merge — Parameter values a merge carries over to the main product (“From merge”) now stay; before, a later sync of its feed could delete them. (2) Global parameter mappings — A parameter mapping for all vendors (“Global”) applies at every step of an import. Before, part of the import bypassed it, so the value could also end up under the feed’s own parameter; a later sync removes it from there. (3) Grandus transfer — Some products already in Grandus were sent as new products on every transfer, and Grandus refused them. The transfer now finds and updates them in Grandus. (4) Package limits — When adding a vendor or a product would exceed your package’s limit, a message in your language states the limit and suggests removing items you no longer use or moving to a higher package. (5) Stripe without Link — The Stripe payment page for your package and for Monokaido AI credit no longer offers Stripe Link, which could ask for an SMS code first; card and the other payment methods stay. (6) Long categories — A vendor category sent as a whole path (e.g. “Sport > Cycling > Mudguards”) shows only its last level in the product list and in “Fill Parameters”, with the full path on hover; a long name is cut short instead of running into the “Status” column.

    New featureVendors29 September 2026

    Your own parameter in a feed mapping — even one the feed does not send

    In a feed’s JSON mapping you can now add a parameter of your own to the vendor’s imported products, even when the feed itself does not send it. Add a key in the form “param:Name” and give it a feed column or a fixed text starting with “=” — for example, “param:Warranty” with the value “=24 months” lands on every product. Edit the mapping when you add a vendor through “AutoAdd – AI feed analysis” or “Manual dynamic feed”, and for a vendor added that way in Settings → Vendors & Imports → the vendor’s menu → Edit feed mapping. A mapping with a key that has no name or no value is not saved, and the message lists the keys to fix. “Re-analyze feed with AI” keeps your keys. Admins and editors can change the mapping.

    ImprovementProducts29 September 2026

    Improvements: product merging, product type, warehouses, AI and parameters

    Smoother work with products, parameters and AI. (1) Easier merging — On “Product Merge” and “Bulk merge” the full title shows, long values appear on hover and the merge button stays in a bottom bar; a merge started from “Suggestions” returns you there with the same filters and page. (2) Type follows the variants — With 2 or more variants a product is “Configurable” automatically, with one “Simple”, imports included; “Bundle” and “Digital” are only filter labels. (3) Warehouse from the product — On the product edit “Inventory” tab, “Add warehouse” creates one that shows in the stock grid at once. (4) AI errors and models — A failed AI action says what went wrong and what to do, not the provider’s raw error. The model picker in AI Settings offers only usable models and will not save one your key cannot use. (5) One set of AI fill options — The bulk “AI Extract Parameters”, the “Fill Parameters” flow step and the product dialogue share option names, grouped under “What the AI is asked about”, “What may be written” and “What the AI may draw on”; each shows those that apply to it. (6) Template picker — In “Fill Parameters”, “By template” mode lets you search, filter and sort templates and see their completion; “Fill N products” opens only the incomplete ones. (7) Upload progress — Uploading a vendor file shows a percentage, then “File uploaded — processing on the server…”. (8) Faster “Parameter Definitions” — With large catalogues it loads many times faster, and an “In a template / Not in a template” filter shows which parameters templates use.

    New featureParameters29 September 2026

    Map parameter from the product — move values under the right parameter

    When a value sits under the wrong parameter, you can move it to the right one straight from the parameter table on the product detail or edit page: ⋯ menu → “Map parameter”. For a feed value you choose whether the mapping applies to that vendor only or to all vendors; values already imported move at once, and later syncs write them into the chosen parameter. For a value written by AI or by a person, such values of the parameter move across the whole company at once, not only on this product, while feed values stay where they are. Search for the target parameter or create a new one by name; before you confirm, the dialog shows how many values on how many products will move, merge with an identical value, be removed or stay in place. “Replace it in the templates with …” swaps the parameter in the templates that list it in the same step. Admins and editors can map parameters.

    ImprovementParameters29 September 2026

    Product parameter table — several values as a tree, a status for each value

    Product parameters now appear in the same table on the product detail and on the product edit page, so a parameter with several values looks the same on both screens. Every stored value has its own row, and the values of one parameter are grouped as a tree, with the parameter name on the first row only. The Status column shows what really happened to the value — Unchanged, Normalized, Edited, Remapped, Awaiting sync or Unmapped — and hovering over it explains why, for example what the value originally was. Tabs above the table filter the rows by status: All, plus each status that has at least one row. A value-mapping tag appears only when the mapping actually changes the value.

    New featureParameters29 September 2026

    Suppress a parameter value — an unwanted value goes and syncs do not bring it back

    You can now suppress a parameter value you don’t want on a product — it disappears from the product, and neither feed syncs nor the AI parameter fill write it back. On the product detail or edit page, open the ⋯ menu next to the value in the parameter table and choose “Suppress value”. Once you confirm, the value is removed from the product, the storefront and the export feeds, whatever its capitalisation or accents (e.g. “White” and “white”). Suppressed values are listed on the Suppressed tab, which appears once you suppress something, and “Restore” puts a value back on the product. Admins and editors can suppress and restore values.

    Let's try it on your own catalogue

    We'll walk through your feeds, categories and parameters live.