Skip to content
    Changelog

    What's new and improved in Monokaido

    Every entry comes here straight from the production release — with its date, module and type of change.

    Filters· 632 entries
    Module
    ImprovementStorefront23 October 2026

    Improvements: a category strip in the header, Venalio without merging into variants

    Improvements to the shop and to imports. (1) Category links strip — In the Storefront Builder, the “Header” group's “Navigation” offers a new “Category links strip”: the top-level categories as links in a strip in the shop's colour, with categories that have subcategories opening a dropdown. The strip shows on desktop; the phone menu stays the same (Storefront v2). (2) Venalio without merging — For a vendor from the Venalio platform you can switch off “Merge into variants”; each feed item (each decor, for example) then becomes a product of its own with its own gallery and parameters. The old products and variants are retired by themselves at the next sync; merging stays on by default.

    New featureE-commerce23 October 2026

    Instalment purchases with Tatra banka

    Shoppers in your shop can buy in instalments with Tatra banka: they apply for the loan on the bank's page and the bank decides within a few days; the order waits up to 30 days for the decision. Add the method in E-commerce → Shipping, payments and rules → Payment Methods (“Add Method”, “Tatra banka – buy in instalments”) or in E-commerce → Integrations, with your own TatraPay+ credentials. It is offered only for orders in EUR between €100 and €40,000. An indicative instalment calculator appears below the product price and in the checkout. If the bank cancels the application or lets it expire, the order is cancelled. Optionally, cancelling an order also cancels the loan application at the bank. Refunds go through the bank manually. The feature comes with the E-shop add-on.

    New featureProducts22 October 2026

    Description images from the gallery, AI description layout kept

    In a product's manual description (Edit Product), change an image with “Edit image” or a double click: the dialog lets you pick another photo from the product's gallery (in the order the shop shows them) or type an image address, change the “Alt text”, or take the image out with “Remove from the description”. Add a new one with “Insert image”. Each photo shows whether the description already uses it, for example “In the description 2×”. A description written by AI now keeps its layout (columns, styles and the specification table); before, merely saving the edit page turned it into plain text. The table is shown in the editor but can't be edited there. The dialog offers the gallery once the product is saved; editors and admins can use it.

    New featureProducts22 October 2026

    Product photo order: you set it, the import keeps it

    Drag a product's photos into order in “Product gallery” on the edit page, or in “Images & Assets” on the product's detail. The main image always comes first; change it with the star. The product page in your shop shows the photos in this order and the AI features use it too; a generated description also uses each photo only once, even when the supplier sent it under another address. The feed import keeps your order: new supplier photos go to the end and the feed no longer decides the main image. With automatic re-sync the new order is also sent to the connected online shops. Editors and admins change the order; products whose gallery nobody arranged behave as before.

    New featureImport/Export21 October 2026

    Import from shops on the Venalio platform

    When you add a vendor (Add New Vendor) there is a new Venalio tile for the product feed of a shop on the Venalio platform. Paste the feed address the shop exports. The import takes the price per sales package and the stock in packages, and merges the items of one product into variants. The feed carries no VAT, so its prices are read as prices including VAT and the rate comes from the vendor's “VAT fallback region”.

    New featureImport/Export20 October 2026

    Custom fields in Google and Facebook feeds

    You can add your own XML fields to a Google Merchant or Facebook export feed, written into every item of the feed. You will find them in Exports → the feed's detail, in the “Custom fields” section: “Add a field from the product” takes the value from a product detail (such as the EAN, brand, code or stock quantity) or from a parameter, and “Add a field with a static value” writes the same text everywhere. A field named like a standard feed field replaces it for products where it has a value; a product without a value leaves the field out. A feed can have up to 50 custom fields, admins and editors set them, and existing feeds do not change.

    ImprovementParameters20 October 2026

    Improvements: the value-mapping filter, a clearer side menu

    Improvements to value mapping and navigation. (1) Value-mapping filter — On Parameters → Value Mappings the chosen filter is kept in the page address, so going back, reloading or opening a saved link shows the same list; the parameter picker searches by name, code and vendor and lists the selected vendor's parameters first. (2) Section side menu — The E-commerce and Blog side menus carry the same group headings as the header menu, and a long menu can be scrolled.

    FixImport/Export20 October 2026

    Fixes: categories in export feeds, the menu in Slovak, merging duplicates

    Fixes to exports, the menu and merging. (1) Inactive categories in feeds — Export feeds for Google, Facebook, Árukereső and Árgép no longer use a category you switched off, or one under a switched-off parent; a feed's list of unmapped categories shows active ones only. (2) The menu in Slovak — The E-commerce and Blog menu items no longer show in English. (3) Confirming a merge — The button says how many products you merge, the dialog reminds you that a merge can be undone in the “Merge history” tab, and the warning about published products appears only when a published product will be hidden by the merge. (4) Loading after sign-up — While the account loads after sign-up you see that it is loading instead of an empty page.

    New featureProducts20 October 2026

    New header menu: sections with descriptions and key figures

    The Products, Parameters, Categories, E-commerce and Blog sections in the header open a wide panel: links are grouped, each with a short description, and duplicates and changes to review show how many are waiting. The “In numbers” box shows the section's key figures from its overview, such as new products in the last 7 days, normalisation coverage, the largest categories, revenue and orders, or articles, and links to the full overview. On phones the menu opens as a panel of expandable sections with the open section's figures. The E-commerce and Blog sections appear only when that module is on.

    New featureStorefront19 October 2026

    Catalogue mode: a shop that shows its range without selling

    A shop on Storefront v2 can now work as a catalogue: it shows its products, while the cart, the buy buttons and the checkout disappear. Turn it on in E-commerce → Storefronts → the shop's detail with the “Catalog mode” switch (with “Storefront Enabled” on). Instead of the buy button a product can offer an inquiry form; turn it on in the Storefront Builder in the “Inquiry form” group and choose which fields are required. The mode is off by default, is switched on by an admin and comes with the E-shop add-on. Orders placed earlier stay in the order history.

    New featureE-commerce19 October 2026

    Contact forms: shoppers' messages and inquiries in one place

    Messages shoppers send through your shop's forms are listed in E-commerce → Contact forms. The list can be searched and filtered by form and by shop; the detail shows the fields filled in, the product an inquiry came from and the signed-in customer. In the Storefront Builder you can add a “Contact form” section to the home page of a Storefront v2 shop; the e-mail field is always required and you choose the other fields. Every user of the company can read the messages, and only an admin can delete one permanently (for example at a customer's request). The feature comes with the E-shop add-on.

    ImprovementParameters17 October 2026

    Improvements: value rules, vendor comparison, phone gallery, a faster shop

    Improvements to parameters, products and the shop. (1) Feed value rules — Once a feed parameter is mapped to another parameter, the original parameter's value rules apply first and the target's only after them. (2) Compare vendors — Create a proposed mapping with “Create mapping”, skip it, or create several at once. (3) Phone gallery — The product gallery on phones shows the photo count, dots and arrows. (4) Blog SEO — Articles have a canonical address on the shop's domain and data for search engines and social networks. (5) Faster Storefront v2 — The category menu and the cart load only when needed. (6) Brand pages — Brand listings load much faster. (7) Product split — You can split by a key only some products carry; the others stay as they are. (8) Duplicates — Sort suggestions by name or by fewest products.

    FixERP and transfers16 October 2026

    Fixes: blog articles, i6 payments, WooCommerce images, exclusion filters

    Fixes to the blog, transfers, exports and the shop. (1) Blog articles — Headings, paragraphs and lists show correctly in the shop and in the editor, older articles included. (2) i6 payments — An order's payment is sent once the order reaches the ERP; a payment that was not sent triggers an e-mail to the ERP alerts address. (3) WooCommerce images — Transfers no longer re-upload images the shop already has, so the media library no longer fills with copies. (4) Exclusion filters — A brand or category filter no longer drops products without a brand or category from feeds and the sitemap. (5) Redirects — Custom redirects also work for addresses with diacritics. (6) Split products in Grandus — After a forced re-push the original product no longer stays in the shop next to the split ones. (7) Imports after an error — One failing product in an Entafix, Origos or LevelSportKoncept import no longer stops the products after it.

    New featureStorefront15 October 2026

    8 new shop styles in the Storefront Builder

    E-commerce → Storefront Builder has eight new styles in the “Shop style” section of the Design tab: Noir, Fashion, Natural, Playful, Sport, Soft, Nordic and Vintage. There are 13 in all; “Show all styles” lists every one. Each style sets the shop's whole colour palette. Nothing changes on existing shops until you pick a style and publish it. The styles apply to shops on Storefront v2 and come with the E-shop add-on.

    New featureStorefront15 October 2026

    Home page layouts: a ready-made set of sections in one click

    In E-commerce → Storefront Builder, the “Page layout” button on the Sections tab opens five ready-made home page layouts: Standard, Showcase, Catalogue, Brand story and Simple. A layout replaces the whole list of sections; if you edited it by hand before, you are asked first, and you can undo the change. Text and image sections appear in the shop only once you fill them in. It applies to shops on Storefront v2 with the E-shop add-on.

    New featureParameters15 October 2026

    “Don't carry this value over”: a feed value that goes nowhere

    A value-mapping rule can now discard a feed value entirely. Tick “Don't carry this value over” in the value-mapping dialog and the value is not written to the product, so it never reaches the shop, export feeds or the ERP. Values entered by hand or by AI are not affected. In the product's parameter table such a value shows the state “Not carried over”. The option is off by default and is set by admins and editors.

    New featureProducts13 October 2026

    Merge templates: the same set-up in one click

    You can save a merge set-up (what to take from which product) as a template and apply it to the next pair. In Products → Duplicates, both when comparing a pair and in a bulk merge, you will find “Save as template”, “Apply a template…” and “Manage templates”, where you rename or delete them. A template saved with the products the other way round is swapped automatically. Admins and editors save and manage templates. Picks of individual images are not saved in a template.

    New featureProducts13 October 2026

    Merging duplicates: choose where parameters, price and stock come from

    When merging duplicates you now decide, for each parameter, which product it is taken from. You will find it in Products → Duplicates, both when comparing a pair and in a bulk merge, in the “Take from” column (Default, All or one of the products). A new strategy takes the parameters from one product first and fills the rest from all of them. Values the merge will not keep are struck through. The “Price and stock” card copies the price or stock of another product onto the matching variants once; the next feed sync of the main product overwrites them. Admins and editors can merge, the default behaviour is unchanged, and undoing a merge restores the previous values.

    New featureParameters13 October 2026

    Value transforms: tidy feed values without writing rules

    Value mapping now offers ready-made transforms with a preview of the result: upper and lower case, trimming and removing spaces, “30 cm” ↔ “30cm”, a whole number or a number with decimals, removing diacritics or text in brackets. You will find them in the value-mapping dialog under “Use source value”. “Custom transform…” builds steps such as a prefix and suffix, splitting into several values, replacing text or a regular expression. In Parameters → Value Mappings, “Bulk transform” applies the same steps to many unmapped values at once and saves only those that change. The feature is for admins and editors.

    FixERP and transfers12 October 2026

    Fixes: re-sync to online shops, product split, reordering

    Fixes to transfers to online shops, product split and the shop. (1) Automatic product re-sync — A product change made while products were being sent to Grandus, WooCommerce or Shoptet is now sent with the next re-sync; before, it waited until the product changed again. Sending to one shop no longer hides a change from the re-sync to another. (2) Product split after imports — For suppliers with many split products, every group is now reconciled over successive imports; before, some changed groups were never reconciled. (3) Reordering in the shop — Reordering from an order's detail in the customer account creates a cart in the shop's currency and language; before, the cart could show amounts in another currency with a € sign. If the cart held items in another currency, it is emptied first and the customer is told so.

    FixERP and transfers12 October 2026

    Fixes: Grandus sizes, AI value mapping, change review, deleting a vendor

    Fixes for transfers, parameters and the blog. (1) Grandus sizes — A size Grandus does not have yet is created even with a default size set (the default covers only variants without a size name), so the stock and EAN of different sizes no longer end up on one size; if Grandus has the size in another spelling (“XXS/S” and “XXS-S”), that one is used. The size option is recognised regardless of case and accents (Veľkosť, Velkost, Size), so a colour and size product no longer arrives with its colours as sizes. (2) AI value mapping — In Parameters → Value Mappings, “Apply selected” saves more than 2,000 suggestions; before, a list that long saved nothing. A run over all unmapped values no longer skips values while high-confidence mappings are saved automatically. (3) Change review — When the “Fill Parameters” flow step or the bulk “AI Extract Parameters” overwrites a value, Products → Changes to review shows the replaced value in the “Before” column instead of “—”. (4) Derived products — When a product created by a split loses a parameter value, a Grandus or WooCommerce transfer with “Automatic product re-sync” on sends the change at the next re-sync. (5) Deleting a vendor — The confirmation in Settings → Vendors & Imports now says correctly that the products stay in the catalogue, stop syncing and lose their stock from that vendor. To remove the products as well, use “Flush Data” first. (6) Blog translation — “Auto-Translation” in the blog settings no longer translates a new AI-generated article into a language your company has switched off.

    FixVendors12 October 2026

    Feed parameters — outdated values no longer pile up next to current ones

    When a supplier’s feed changes a parameter value or stops sending the parameter, the sync removes the old value from the product, so past model years and the like no longer pile up next to the current one. Only feed values are removed, and only after the current ones are stored: values written by AI or by hand, values from a product merge and the output of conditional rules stay. If the feed looks incomplete (more than a quarter of the supplier’s active variants are missing), nothing is removed; products whose feed rows carry different parameters (one row per size, for instance), products with a retired variant and products without parameters are left as they are too. A parameter whose mapping is switched on keeps its last value even when the feed stops sending it. With “Automatic product re-sync” on, a cleaned product is sent to Grandus or WooCommerce again. The import detail (Settings → Import Logs) shows how many products were handed over for cleanup; the fix is on automatically.

    New featureProducts12 October 2026

    Search by a list — paste codes, EANs or SKUs from Excel at once

    Paste a whole list of codes, EANs, SKUs, external IDs or IDs into the product search — an Excel column, for example — and find every matching product at once. Switch to a list with the “List” button next to the search box; pasting a list switches by itself, and “Search as one text” takes you back to a normal search. Values must exactly match a product’s code, EAN, external ID or ID, or a variant’s SKU or EAN; a list holds at most 300 values and 4,500 characters, and duplicates are skipped. Values with no product in the results are marked “without a result”, so you can copy them or remove them from the list. The list works in Products → All Products, on a warehouse’s detail page (Settings → Warehouses), on the Fill Parameters page and in Photo Studio’s bulk photo edit when your package includes Photo Studio; bulk actions on “All Filtered” affect only the products the list found.

    New featureSettings11 October 2026

    Notification bell — finished jobs, new orders and failing imports

    The admin header has a new notification bell: it tells you when a background job you started finishes, fails or is interrupted, when a new order comes in and when a supplier import keeps failing. Jobs are bulk AI descriptions, parameter extraction, image alt texts, template assignment and value mapping, AI product and parameter translations and Photo Studio batches — the notification goes to whoever started the job. Every member of the company hears about a new order when your e-shop is on, and about a failing feed too: after three failures in a row and at every third failure after that. The unread count refreshes every 30 seconds, a click opens the order, the job or the supplier, and “Mark all as read” marks everything at once. Switch individual kinds off in Settings → Notifications on the “In-app notifications” card — email notifications are not affected; notifications are kept for 90 days.

    New featureParameters11 October 2026

    Vendor parameter match — AI pairs the parameters of two suppliers

    AI compares the parameters of two suppliers and proposes which feed parameter of one is which parameter of the other; the pairs you confirm become ordinary parameter mappings. Find it under Parameters → Parameter Mappings behind the “Compare vendors” button, which admins and editors see once you have at least two suppliers. Pick a source and a target supplier, the AI goes through the source’s unmapped parameters in batches, and you answer “Yes” or “No” to each proposal — you can accept every high-confidence proposal at once or pick the target parameter by hand. Nothing is saved until you confirm; the mappings belong to the source supplier, and its values move on its next sync or straight away with “Load the values now”. A name a global mapping already covers is skipped. The analysis needs an available AI provider, and an admin can edit its instructions in AI Settings as the “Vendor parameter match” prompt template.

    Let's try it on your own catalogue

    We'll walk through your feeds, categories and parameters live.