Skip to content
    Changelog

    What's new and improved in Monokaido

    Every entry comes here straight from the production release — with its date, module and type of change.

    Filters· 632 entries
    Module
    New featureProduct Flows27 August 2026

    Category mappings in flows — a mode that replaces manual categories

    The “Apply Category Mappings” flow step can now tidy up a product’s manual categories, not just add to them. In Products → Product Flows the step’s settings have a “Category assignment mode”: the default “Add alongside existing” works as before, while “Replace manual categories” removes the manual categories that no matching rule assigns. Every category assigned by a rule the product matched in that run is kept, so rules never remove each other’s categories. The product’s main category, supplier categories and categories carried over from a product merge are never removed, and if no rule matches the product, or a rule cannot be evaluated, nothing is removed. The removal cannot be undone from the “Review changes” panel — the flow editor warns you about this, and the step’s card shows that replace mode is on. Flows are edited by admins and editors.

    New featureParameters27 August 2026

    Remove a parameter from Monokaido — parameters you do not need leave your screens

    A parameter your supplier sends needlessly can now be hidden from the whole of Monokaido without losing any data. In Parameters → Parameter Definitions and Parameters → Manage Parameters each parameter has a “Remove from Monokaido” action; in Parameter Definitions you can also apply it to several selected parameters at once. A removed parameter no longer appears in lists and pickers, yet its values stay stored, imports keep writing them, and flows, rules and AI built on it work as before. You can add an optional reason, shown on the “Removed” badge, and with the E-shop add-on you can tick “Hide on the eshop too” to take the parameter off the product page and the filters of your shop. A parameter you remove also stops being sent to export feeds and to your ERP, and sending stays off after you restore it until you switch it on yourself. In Parameter Definitions the “Removed parameters” filter shows it and “Restore” brings it back; admins and editors can remove and restore parameters.

    ImprovementProducts27 August 2026

    Changes to review — the exact time of every change and a minute-by-minute product history

    When you review changes you now see exactly when each change was made to a product. In Products → Changes to review the “Last change” column shows the exact date and time under the relative time, and in the “Review changes” panel every changed field, and every step of its sequence of changes, carries its own date and time. The panel opens on the “All changes” tab, with a tab beside it for each minute in which changes were recorded; minutes with nothing left to review are greyed out. It shows the product’s whole recent history, including up to the 5 most recent changes already reviewed or reverted, while reverting still restores only the state before the unreviewed changes. Above the changes you see the product’s parameter templates with how complete each one is and a link to it, collapsed to a single line by default. The “Change history” page on the product detail is also split into minutes and shows the templates in the same way.

    ImprovementParameters26 August 2026

    Value mappings apply at once — in the shop, feeds, transfers and AI

    Value mappings (Parameters → Value Mappings) now apply straight away everywhere values leave Monokaido: in your shop (product page, filters, variant selector), in export feeds, in transfers to ERPs and shops, and in AI. Values you or AI wrote into products are left as they are — the admin shows the stored value and, for a mapped one, a “Sent as: …” line with the value that actually goes out. Variant options are mapped too, and for feed values a changed mapping target takes effect without waiting for the next import. After a mapping change the shop's catalogue and filters refresh, and Grandus and WooCommerce transfers with “Automatic product re-sync” on go over the products already sent and push those whose content changed. Product list filters, shop and export feed filters and rules, and flow conditions written against a parameter value match both the mapped and the stored value, so older settings keep working; the shop's filter, however, offers only mapped values.

    New featureSettings24 August 2026

    Monokaido manual — guides to the app in Slovak and English

    Monokaido now has an online manual in Slovak and English with annotated screenshots, and it opens in your language. The question-mark icon next to a screen's title (“Open the manual for this screen”) opens the chapter about that screen in a new tab, and the collapsible help block at the bottom of a screen has a “Full chapter in the manual” link that stays visible even while the block is collapsed; both appear only where such a chapter exists. The “Manual” link in the footer opens the whole manual. The manual covers getting started, the dashboard, products, parameters, categories, AI, e-commerce, the blog, exports, settings and a glossary. It is available to every user, whatever their role.

    New featureStorefront21 August 2026

    Google Tag Manager from your own server — server-side tagging for your shop

    Your shop can now load Google Tag Manager from your own tagging server instead of from Google. E-commerce → Storefronts → (storefront) → Tracking & Services → Google Services has two new optional fields: “GTM server” for the https address of your tagging server, and “GTM container path” for a container served from a custom path. The server must be an https address without a path, and the container path may contain only letters, digits, underscores and hyphens; it can be filled in only once a server is set. Leave the server empty and the container keeps loading from Google as before. It works with both the classic storefront and Storefront v2, and company admins with the E-shop add-on can change it.

    FixStorefront20 August 2026

    Fixes: main category on import, invitations, change review, amounts and the shop

    We fixed issues you may have hit in the catalogue, team settings and your shop. (1) Imports keep the main category — A category mapping rule sets the main category only for a product that has none yet; for the others it adds its target as an additional category, and the rule editor explains this. When several rules match, the deepest target category wins, so every import gives the same result. (2) A new invitation after expiry — You can re-invite an address whose invitation expired or was already used; it gets a fresh link valid for 7 days, and “Copy Link” in Pending Invitations copies a working link. (3) Names in Changes to review — Brand, categories and “Merged into” show the name instead of a shortened ID, including changes recorded earlier. (4) Monokaido AI credit used up — AI actions now say the credit is used up and offer to buy more or set up your own AI provider, instead of reporting that no provider is configured. (5) Amounts in your language — Amounts in the admin and in order e-mails follow the language’s format, and forint amounts are shown without decimals. (6) Cart totals add up — The cart subtotal is the sum of the VAT-inclusive prices, and the order detail in a customer’s account lists the VAT and any payment surcharge. (7) Shop filters — The counts next to filter values on a category page match the products the listing actually shows. (8) Phone numbers with a dial code — A number entered at checkout or in the customer account is saved in international format, and checkout asks the customer to add a missing country dial code.

    FixProducts20 August 2026

    Fixes: Grandus, manual duplicate search, IČO lookup, discount codes and shop checkout

    Fixes for Grandus vendors and transfers, duplicates, sign-up and your shop’s checkout. (1) Switched-off products in Grandus — When you switch off a published product that is already in Grandus, “Automatic product re-sync” sends it once more and it is deactivated there; before, the re-sync skipped it and it stayed active in Grandus. (2) Removed Grandus categories — Categories that disappear from the supplier’s tree are marked “Inactive” in Categories → By Vendor at the next sync, not deleted, so their products and mappings stay. (3) Manual duplicate search — Running the same search again in Products → Duplicates → Manual Search no longer adds pairs already waiting in Suggestions; the result message lists them as skipped. (4) Company details by IČO — “Fetch from register” at sign-up and “Import from Registers” in Settings → Company (admins) fill in the current name, address and DIČ, and now also find sole traders (the register usually has no DIČ for them, so enter it yourself). (5) Discount code with a space — At sign-up, a discount code with a space at the start or end is accepted, not rejected. (6) Shipping and payment descriptions — If you translated only the name of a shipping or payment method, checkout in a shop in another language now shows its original description; before, it was blank. (7) Country at checkout — A country the customer picked at checkout is no longer reset to the shop’s default when they reload the page or return to checkout.

    New featureERP and transfers20 August 2026

    Product ID in your shop or ERP — shown on the product detail

    The “Details” card on the product detail now shows the ID that the shop or ERP you transfer the product to uses for it — a row such as “Grandus E-commerce ID”, “Shoptet ID”, “WooCommerce ID” or “ANsystems ID”. A row appears for each enabled transfer once it has received the ID from the target system; until then it stays hidden. If you have more than one transfer to the same system, the transfer's name tells them apart. The information is read-only and every member of the company can see it. Companies without an enabled Grandus, Shoptet, WooCommerce or ANsystems transfer see nothing new.

    New featureAI17 August 2026

    Monokaido AI tokens — your monthly allowance now refills itself

    Monokaido AI now distinguishes between two kinds of tokens. The monthly allowance that comes with your package refills automatically at every subscription renewal — there is nothing to do, a fresh batch is ready the moment the period renews. Unused monthly tokens expire at the end of the billing period and do not carry over, so treat the monthly allowance as a steady draw rather than something to stockpile. Tokens from a credit purchase, a coupon, or a support grant, on the other hand, never expire and stay available until you spend them — AI features only reach for them once the monthly allowance runs out. You can check both balances any time in the AI settings.

    New featureAI16 August 2026

    Monokaido AI credit — top up exactly as much as you need

    Monokaido AI now runs on prepaid credit: your tokens draw from a single balance, and when it runs out the AI features pause until you top up — no hidden background billing. Right in the AI settings you will find four credit packages at 10, 30, 100 and 250 euros; the bigger the package, the better the price per million tokens. Payment is by card through a secure gateway, the credit is added the moment the payment goes through, and a confirmation lands in your inbox. The tax invoice appears in your payment history automatically. When the credit drops below a tenth we warn you by e-mail and in the app, so running out never catches you mid-work — and the purchase history on the same card shows every top-up and its status. The earlier "dynamic continuation" ends with this change; your credit is always under your control, up front.

    New featureAuthentication14 August 2026

    Invitations for you — accept an invitation to another company inside the app

    When another company invites you to its team, you can now accept the invitation inside Monokaido, without opening the link in the e-mail. Settings → Team has a new “Invitations for you” card listing the invitations sent to your e-mail address: the company, the role, who invited you and the date the invitation is valid until. Click “Accept” to become a member, then use the “Switch to …” button in the confirmation to move to that company straight away. Every user sees the card whatever their role, and it stays hidden when there is nothing for you. If the company has no user seats left or its billing is suspended, “Accept” is disabled and the reason is shown below it; the invitation page opened from the e-mail now also tells you whether the company is full, has an unpaid bill or is suspended.

    FixVendors13 August 2026

    Fixes — supplier syncing, sign-out after payment and Grandus imports

    Fixes from 4–13 Aug 2026. (1) Supplier syncing — recovers by itself after a lost connection, large imports are no longer cancelled mid-run, suppliers sync at the interval you set, and SFTP availability feeds no longer fail on every run. (2) Grandus imports — an interrupted import keeps what it has already saved and reports exact counts instead of failing with 0 products. (3) Subscription payment — you stay signed in after returning from the payment gateway, you no longer enter your e-mail twice, a discount code from registration shows on the package cards, and sign-up and sign-in error messages are accurate. (4) Yearly and free packages — a yearly subscription is recorded as yearly, a package change made in the payment gateway’s portal takes effect, and a company on a free package can no longer be locked out or offered the package it already has. (5) Manual duplicate search — products no longer stay hidden from the shop and the ERP, and they reappear once the link is removed. (6) “Product not found” — products with many categories open quickly, and the screen tells a missing product apart from other errors and offers a retry. (7) Grandus parameters and variants — a parameter dropped from the feed is removed, a changed value replaces the old one, variants are no longer doubled and the product code stays up to date; AI-written, hand-entered and rule-generated values are left alone. (8) Formatted text in the shop — blog articles, pages and product and category descriptions show headings, paragraphs and lists instead of one block of text.

    ImprovementVendors13 August 2026

    Improvements — a fast supplier list, category rules and fewer needless pushes

    Improvements from 4–13 Aug 2026. (1) Supplier list — loads in a fraction of a second instead of tens of seconds. (2) Category mapping rules — are now evaluated in batches, so applying them across a large catalogue is much faster. (3) Pushes to shops — a product is sent to Grandus, WooCommerce and Shoptet only once 60 seconds have passed since its last change, so one import no longer pushes it repeatedly with identical content. (4) Merging duplicates — bulk and single merges and their undo no longer end in a timeout error; if a bulk merge does run out of time, the form locks and points you to the merge history, as the merges may still be finishing. (5) Subscription payment — package prices are net of VAT, the tax is calculated automatically at checkout and the payment page asks for your billing address and VAT number; existing subscribers keep their price. (6) Parameter tabs — the “unmapped” badge appears as soon as the page opens, and the tab counts show real totals rather than the size of the current page. (7) Small admin touches — companies on the Monokaido Platinum package see their own banner on the subscription tab instead of the S/M/L offer, Notifications now appear in the settings menu, and the icon in filters has moved next to the field label.

    New featureSettings13 August 2026

    Payment history — a screen of its own, with paging and an export

    Your subscription invoices now live inside Monokaido, on a Payment history screen of its own in the menu directly under Subscription, paging through the whole history. Each invoice shows its status — Preparing, Unpaid, Paid, Voided — along with its VAT, and links straight to the PDF, so nobody is sent off to the payment provider's own portal. The next payment is quoted from the upcoming-invoice preview rather than the price list, so it includes VAT and any active discount, and when that lookup fails the screen shows a dash instead of claiming no payment is scheduled. The export walks the entire history rather than the rows on screen and writes a file that opens in Excel with Slovak diacritics intact. Reading it is open to every member of the company, not only admins — the person who needs last month's PDF is often an accountant on a view-only seat.

    New featureSettings12 August 2026

    The package picker after signup — swipeable, with the trial terms up front

    On a phone, the package chooser shown right after registration is now a horizontal track that snaps each card to the centre of the screen with a sliver of its neighbours visible on both sides, plus a swipe hint and dots that say how many packages there are and jump between them. The track opens on the recommended package, so the price ladder keeps its natural order instead of being reshuffled. On wider screens the layout is exactly the grid it was, and the third column now appears based on how much room the block actually has rather than on screen width. Above the cards, three short lines say that nothing is charged today, give the exact date of the first charge and state that cancelling during the trial costs nothing — and they appear only for a company that would really get the free days.

    New featureVendors12 August 2026

    Grandus — exclude root categories from the default category

    Grandus sends a root category alongside the real one, so the default-category parameter filled up with noise such as “Hlavná” — over fifteen thousand junk values on one catalogue. The supplier settings gained a section where you list those categories by name or by identifier; it starts empty, so nothing changes until you fill it in. The list is applied on the next sync, and the number of values left out is always recorded, so a mistake never goes unnoticed. If the list would empty the parameter for more than a quarter of the catalogue, a safety valve sets it aside and the import log tells you so. Monokaido also points out any value carried by almost every product, but only as advice — it never removes it on its own.

    New featureProduct Flows11 August 2026

    An automation condition can now read a parameter value

    Automation conditions gained a new field, "Parameter value": you pick any parameter and compare its value, so a branch such as "if Availability equals Clearance, remove the product from the feeds" lives inside the automation rather than only in the filter that selects the products. Values are compared with surrounding spaces ignored on both sides, because supplier feeds routinely pad the same word out to the full width of the field. "Not equal" is a true negation, so a product that does not carry the parameter at all passes it too — exactly what a rule like "anything that is not clearance stays listed" needs. And a condition with no parameter picked would silently send every product down the false branch, so the canvas marks it with a dashed amber outline.

    New featureParameters11 August 2026

    Reorder template parameters by dragging

    The order of parameters inside a template can now be changed by dragging, not only with the up and down arrows. Each row gained a grip handle you drag it by, so the fields inside the row stay editable, and the arrows remain for touch and keyboard use. Saving also renumbers the whole list from what is on screen, which repairs an older annoyance: after deleting and adding rows the stored order could drift from the displayed one, so a template opened later showed a different sequence than the one that was saved. Blank parameter names are now rejected and surrounding spaces trimmed. Arranging a long template is one drag instead of a dozen clicks, and the order you saved is the order that comes back.

    New featureParameters11 August 2026

    The parameters screen now searches names, not just values

    The search box on the parameters screen now matches the parameter's own name and code as well as the values products carry — searching for "Default category" went from 42 hits to more than 30,000 on a real catalogue. Each of the two parameter views says which view it is and links to the other, so it is clear whether you are looking at parameter definitions or at how they are mapped. The counts beside the tabs show real totals rather than the size of the page you happen to be on, and each tab loads its data only when you open it. Finding a parameter by its name finally works, and the heaviest screen in this area stops loading data nobody asked to see.

    New featureProduct Flows11 August 2026

    New automation step — Set Product Availability

    Automations gained a "Set Product Availability" step that switches a product's listing, its orderability and its internal activity in Monokaido from a single rule — any of the three can be left untouched. "Remove from feeds" takes the product out of export feeds, comparison sites and the shop while keeping it in Monokaido, and deactivates it in a connected shop system too; the internal switch is labelled as internal exclusion and warns that a connected shop will not hear about it. Crucially, the decision survives the next supplier import: a product whose availability was set by hand or by a rule is marked as such, and imports stop overwriting those three values until all three are permissive again. So instead of hand-picking products out of the feeds and watching the next import put them back, you write one rule — and every product whose availability really moved shows up in the change history.

    New featureProducts10 August 2026

    Saved duplicate searches — one click instead of retyping

    A manual duplicate scan is a four-part mapping — supplier A and the field to match on, supplier B and its field — that had to be retyped on every run, and retyping is how the two sides get swapped, which silently changes which product survives the merge. You can now save that mapping, including its orientation and the category-scope and direct-linking switches, and run it again from the panel with one click. Each saved search keeps a note of when it last ran and how many matches it found. Renaming it or adding a remark no longer costs that record — it happens in the same dialog the search was created in, while the mapping stays where you set it, and the dialog says so.

    New featureProducts10 August 2026

    Merge history and an un-merge that truly puts everything back

    Every merge and un-merge of duplicate products is recorded on its own history tab, and un-merging now restores the state from before the merge, not just the two products. A merge remembers everything it touched — the duplicate links it removed or redirected, the connections it overwrote, the categories it copied and the duplicate suggestions it closed. The un-merge puts all of that back, but checks each change against the current state first, so a decision an administrator made in the meantime always wins: a link created since is left alone, and a product deleted since is skipped. Products come back with the status they had — a published product returns published, not as a draft. Merges made in a chain are undone newest first, and the screen tells you so. Merging becomes a safe experiment.

    New featureProducts10 August 2026

    Change review — template parameters, the full edit chain, and a named next status

    When an automation pinned a template to a product, the review panel now lists that template's parameters with their current values and marks the required ones still empty — but only when that template really is the product's primary one; otherwise a short note explains why the list cannot be shown. The copy also states plainly that pinning a template does not fill in values. Where several unreviewed edits hit the same field, you can expand the full sequence of steps with who made each one and when, instead of a single before-and-after pair. And the confirm button names the status it will move the product to, is disabled with an explanation when there is nowhere to promote to, and confirming marks the changes reviewed at the same time — so the queue and the status stay in step.

    New featureSettings9 August 2026

    Admin notifications now start switched on

    All eight e-mail notifications for company admins are switched on for a new company instead of off. Until now nothing was written into a company's preferences until somebody clicked a switch, and the unset state meant "don't send" — so the daily summary, the unfamiliar-login alert, bulk-action failure warnings and the AI-token quota warning reached nobody who had not gone looking in the settings. Anyone who deliberately switched a notification off keeps that choice: an explicit opt-out still beats the new default. And the daily digest stays quiet on a quiet day — empty sections drop out, and when there is nothing to report no mail is sent at all.

    Let's try it on your own catalogue

    We'll walk through your feeds, categories and parameters live.